BDCOM S2520-P - PoE Ethernet Switch with 20 GE ports (1 console port, 16 GE PoE ports, 2 SFP 100/1000M ports, 2 GE combo TX/SFP ports, 1 standard AC220V power supply, 265W, cooling fan, 1U, standard 19-inch rackmount installation).
The BDCOM S2500-P series is a next-generation intelligent PoE access switch designed for IP MAN and enterprise carrier networks.
Based on the new generation of high-performance hardware and BDROS platform, it supports functions such as ACL, QinQ and QoS. Its simple management mode and flexible installation can meet the requirements of any complicated scenario;
The BDCOM S2500-P series consists of 3 models: S2510-P, S2520-P and S2528-P;
Carrier-grade Ethernet access switch
The S2500-P series supports carrier-grade Ethernetring protection protocol with a recovery time of less than 50 ms, STP/RSTP/MSTP, backup uplink ports and LACP link aggregation to meet the high reliability requirements of carriers;
The S2500-P series has powerful ACL functions to access and control L2-L7 data on a physical port basis, providing operators with flexible and varied policy control methods;
The S2500-P series supports in-service software upgrade (ISSU) to ensure uninterrupted data forwarding during system upgrade;
The S2500-P series supports various L2 multicast functions, such as IGMP-snooping, fast-leave and MVR, to fully meet the operator's IPTV operation requirements.
Main characteristics:
16 GE PoE ports
2 GE TX/SFP combo ports
2 SFP 100/1000M ports
Intelligent PoE+
The S2500-P series supports the IEEE 802.3AF/AT PoE standard, and power mapping scales up to a maximum of 370W PoE+ power;
Supports non-stop PoE power supply. PoE+ power is maintained during a switch recharge;
It also supports manual and dynamic PoE power allocation;
Supports up to 2KV thunder test of PoE port and power supply;
Enhanced QoS
The S2500-P series supports priority retagging and complicated flow classification based on VLAN, MAC, source address, destination address, IP or priority, allowing for better rationalization of carrier services;
Provides flexible bandwidth control policies, supporting port/stream based flow limiting, ensuring line rate forwarding for each port;
The S2500-P series supports multiple queue scheduling algorithms, such as SP, WRR and "SP + WRR";
Safety+
Device-level security: Advanced hardware infrastructure design realizes layer-based packet scheduling and packet protection, prevents DoS-/TCP- SYN Flood, UDP Flood, Broadcast Storm or high-traffic related attacks, and supports layer-based command line protection, providing different levels of users with different management permissions.
Perfect security authentication mechanisms: IEEE 802.1x, Radius and BDTacacs+.
The S2500-P series supports storm/multicast/unicast limit, ensuring normal operation of equipment under adverse network conditions.
The S2500-P series supports the perfect ring detection mechanism, ensuring long-term stable network operation.
The S2500-P series supports port isolation within the same VLAN, DHCP-Snooping and IP + MAC + Port binding.
Easy management and maintenance
The S2500-P series supports many management modes, such as CLI, Telnet, SSH, SSL and SNMP;
It also supports WEB management mode, which is easy and efficient to install and debug the device;
The S2500-P series supports FTP, TFTP and SFTP;
The S2500-P series supports ISSU (in-service software upgrade);
The S2500-P series supports SNMP and the BDCOM NMS intelligent network management platform. This combination enables automatic equipment discovery, network topology management, equipment configuration management, performance data statistics and analysis, and problem management;
The S2500-P Series supports Zero Touch Provisioning (ZTP) to minimize manual operator intervention and help reduce customers' initial deployment costs.